Blackstar HT-5RH mkII (HT5RH mkII / HT 5RH mkII)
RM2,900.00
Blackstar HT 5 Watts Amplifier Head
1 in stock
The Ultimate Studio and Practice Valve Amp
To make the HT-5R MkII sound full and toneful even at the lowest volume levels, Blackstar designed a low powered push-pull power amp which produces the crunch and break-up characteristics of a traditional 100W output stage, but at a much lower volume. This is achieved by the use of a 12BH7 dual triode valve in push-pull configuration producing 5 Watts output, which is rich in valve harmonics and compression.
The Power Reduction switch takes you down to 0.5 Watts without any compromise in tone: perfect for driving the valve power stage at home or in the studio.
Blackstar’s patented ISF circuit gives you infinite adjustment over the characteristics of the tone control network and takes you from the USA to the UK and anywhere in between. So now you can effectively design your own tone and finally find “the sound in your head”
Technical Specs:
- 5 Watt Combo (0.5 Watt Setting)
- Unique push-pull power amp design
- 12AX7 preamp valve and 12BH7 power amp valve
- 2 Channels
- Footswitchable voices for Clean and Overdrive
- USB audio out
- Newly voiced studio quality reverb
- 1-8 Ohms/2-16 Ohms Output for extension cabinet
- 1 XLR output for Speaker Emulated output
Weight | 6.8 kg |
---|---|
Dimensions | 39.6 × 21.69 × 22 cm |
Type: | Tube |
Number of Channels: | 2 |
Total Power: | 5W (0.5W setting) |
Preamp Tubes: | 1 x 12AX7 |
Power Tubes: | 1 x 12BH7 |
Reverb: | Yes |
EQ: | 3-band EQ, ISF control |
Inputs: | 1 x 1/4" (instrument), 1 x 1/8" (mp3/line) |
Outputs: | 1 x 1/4" (16 ohms), 2 x 1/4" (1 x 8 ohm/2 x 16 ohm), 1 x XLR (DI out) |
Headphones: | 1 x 1/4" (headphones/line out) |
Effects Loop: | Yes |
USB: | 1 x Type B |
Footswitch I/O: | 1 x 1/4" (channel, voice) |
Footswitch Included: | Yes, 2-button Footswitch |
Construction Material: | Birch Plywood |
Power Source: | Standard IEC AC cable |
You must be logged in to post a review.
Reviews
There are no reviews yet.