|
OVERVIEW
The AT2010 is designed to bring the studio-quality articulation and intelligibility of Audio-Technica’s renowned 20 Series to the stage, for crystal-clear vocal performances. Featuring the same 16 mm low-mass diaphragm found in the critically acclaimed AT2020 side-address studio condenser, the AT2010 excels wherever articulate vocals are needed: in houses of worship, for solo performances, jazz vocalists, singer/songwriters, and more.
FEATURES
- Extended frequency response and superior transient response for smooth, natural sonic characteristics
- High SPL-handling and wide dynamic range provide unmatched versatility
- Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
- Multi-stage grille design offers excellent protection against plosives and sibilance without compromising high-frequency clarity
- Corrosion-resistant contacts from gold-plated XLRM-type connector
- Rugged, all-metal and construction for years of trouble-free service
- Quiet-Flex™ stand clamp provides silent, flexible microphone positioning
PATTERN

|
|
ELEMENT: |
POLAR PATTERN: |
Fixed-charge back plate, permanently polarized condenser |
Cardioid |
FREQUENCY RESPONSE:
|
OPEN CIRCUIT SENSITIVITY: |
40-20,000 Hz |
–48 dB (3.9 mV) re 1V at 1 Pa |
IMPEDANCE:
|
MAXIMUM INPUT POWER: |
100 ohms |
136 dB SPL, 1 kHz at 1% T.H.D. |
NOISE: |
DYNAMIC RANGE (TYPICAL): |
- |
113 dB, 1 kHz at Max SPL |
SIGNAL-TO-NOISE RATIO: |
PHANTOM POWER REQUIREMENTS: |
71 dB, 1 kHz at 1 Pa |
48V DC, 2 mA typical |
WEIGHT: |
DIMENSIONS: |
233 g (8.2 oz) |
162.0 mm (6.38") long, 52.0 mm (2.05") maximum body diameter |
OUTPUT CONNECTOR: |
ACCESSORIES INCLUDED: |
Integral 3-pin XLRM-type |
AT8470 Quiet-Flex stand clamp for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; soft protective pouch |
AUDIO-TECHNICA CASE STYLE: |
T7 |
ACCESSORIES
|
|